# Digi Wi-Me JTAG **URL:** \ **Category:** NET+OS\ **Tags:** ftp\ **Created:** [March 25, 2010, 7:22am UTC](https://forums.digi.com/t/digi-wi-me-jtag/4207 "2010-03-25T07:22:42Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![waltercuter](https://avatars.discourse-cdn.com/v4/letter/w/bc8723/32.png) [@waltercuter](https://forums.digi.com/u/waltercuter)\ **Post date:** [March 25, 2010, 7:22am UTC](https://forums.digi.com/t/digi-wi-me-jtag/4207/1 "2010-03-25T07:22:42Z")
Hi, I’ve a problem whit this device. When launch a debug with a Digi ESP program, the device not received an IP and isn’t connected. With serial console a try to change the parms but nothing. The parms I think are correct… I try with “FTP Server File Sistem Sample” but nothing. This is report of serial: NET+OS Version 7.1 Copyright (c) 1997-2007, Digi International, Inc. ## PLATFORM: connectwime\_esp APPLICATION: LGL Connect ## NETWORK INTERFACE PARAMETERS: Wireless IP address is 169.254.0.1 Wireless subnet mask is 255.255.0.0 Wireless IP address of default gateway to other networks is 169.254.0.100 Wireless protocol mode is for peer-to-peer (ad hoc) networks only) Wireless SSID is Connect Wireless channel is 13 Wireless transmit rate is 11 Wireless transmit power is 15dbm Wireless multi domain capability (802.11d) disabled Authentication type = Open System HARDWARE PARAMETERS: Serial channels will use a baud rate of 9600 This board’s serial number is N99999999 This board’s Wireless MAC Address is 00:40:9D:2E:C9:A8 After board is reset, start-up code will wait 5 seconds Press any key in 5 seconds to change these settings. The device doesn’t start Thanks Bye Walter ---
**Author:** ![egawtry](https://avatars.discourse-cdn.com/v4/letter/e/8e8cbc/32.png) [@egawtry](https://forums.digi.com/u/egawtry)\ **Post date:** [March 25, 2010, 3:49pm UTC](https://forums.digi.com/t/digi-wi-me-jtag/4207/2 "2010-03-25T15:49:38Z")
I haven’t used the WIME but from basic WIFI I say take a look at your channel and protocol. Are you trying to be a server or a client? ---
**Author:** ![waltercuter](https://avatars.discourse-cdn.com/v4/letter/w/bc8723/32.png) [@waltercuter](https://forums.digi.com/u/waltercuter)\ **Post date:** [March 31, 2010, 3:03pm UTC](https://forums.digi.com/t/digi-wi-me-jtag/4207/3 "2010-03-31T15:03:36Z")
Hy, I find a solution… I’ve a NET+OS File Corrupted. Bye ---
**Author:** ![waltercuter](https://avatars.discourse-cdn.com/v4/letter/w/bc8723/32.png) [@waltercuter](https://forums.digi.com/u/waltercuter)\ **Post date:** [March 25, 2010, 4:04pm UTC](https://forums.digi.com/t/digi-wi-me-jtag/4207/4 "2010-03-25T16:04:47Z")
I thanks… I try but nothing… I think the problem is due to the fact that, using Java, I tried changing the WEP key but I probably have the wrong code. I thought that, with the JTAG as the FLASH is erased, there are not a problem… but my Digi don’t connected…