# Digi WR11 XT, WR11-L600-DE1-XU not connecting.  IMIE - simm activated by AT&T.

**URL:** <https://forums.digi.com/t/digi-wr11-xt-wr11-l600-de1-xu-not-connecting-imie-simm-activated-by-at-t/20869>\
**Category:** Digi TransPort WR (Series)\
**Tags:** static-ip, connecting, lte, wr11-xt, att\
**Created:** [November 1, 2019, 3:17pm UTC](https://forums.digi.com/t/digi-wr11-xt-wr11-l600-de1-xu-not-connecting-imie-simm-activated-by-at-t/20869 "2019-11-01T15:17:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TheArtfulPenguin](https://avatars.discourse-cdn.com/v4/letter/t/a88e4f/32.png) [@TheArtfulPenguin](https://forums.digi.com/u/TheArtfulPenguin)\
**Post date:** [November 1, 2019, 3:17pm UTC](https://forums.digi.com/t/digi-wr11-xt-wr11-l600-de1-xu-not-connecting-imie-simm-activated-by-at-t/20869/1 "2019-11-01T15:17:41Z")

</div>

Our cell rep says the IMEI-simm is activated, but when I put the ASN we were given in I get that it can’t register. I have good signal on the Digi, but it doesn’t connect, no IP. It is configured with a static IP. Our AT&T rep stated that all we need to do is put in the ASN, no other settings are needed. Correct?

I’ve reboot it a number of times, and updated the firmware to: 7.1.1.2.

---

<div class="post-metadata">

**Author:** ![jpaczkow](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/jpaczkow/32/9_2.png) [@jpaczkow](https://forums.digi.com/u/jpaczkow)\
**Post date:** [November 22, 2019, 3:13pm UTC](https://forums.digi.com/t/digi-wr11-xt-wr11-l600-de1-xu-not-connecting-imie-simm-activated-by-at-t/20869/2 "2019-11-22T15:13:49Z")

</div>

Good Afternoon,

What is the the APN you are trying to use? Can you post the output of the following two commands:

‘modemstat ?’

and

‘modemprofiles’