# Digione SP and multiple destination IP Address

**URL:** <https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563>\
**Category:** Portserver TS\
**Created:** [February 25, 2009, 8:05pm UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563 "2009-02-25T20:05:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![lyonheart](https://avatars.discourse-cdn.com/v4/letter/l/f08c70/32.png) [@lyonheart](https://forums.digi.com/u/lyonheart)\
**Post date:** [February 25, 2009, 8:05pm UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563/1 "2009-02-25T20:05:32Z")

</div>

Hi All,  
a small question about a task that I have to perform: I have a Digi One SP connected to a serial device. Is it possible to send the serial strings to 2 different IP addresses?

Thanks in advance,  
M.

---

<div class="post-metadata">

**Author:** ![Admin1](https://avatars.discourse-cdn.com/v4/letter/a/bbce88/32.png) [@Admin1](https://forums.digi.com/u/Admin1)\
**Post date:** [February 25, 2009, 8:16pm UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563/2 "2009-02-25T20:16:41Z")

</div>

If you used this in UDP Sockets mode it would be possible. TCP Sockets is 1-to-1.

---

<div class="post-metadata">

**Author:** ![lyonheart](https://avatars.discourse-cdn.com/v4/letter/l/f08c70/32.png) [@lyonheart](https://forums.digi.com/u/lyonheart)\
**Post date:** [February 25, 2009, 8:18pm UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563/3 "2009-02-25T20:18:16Z")

</div>

Thanks for the reply.  
So do you mean that I have to configure it with UDP sockets and insert a UDP multicast address?

M.

---

<div class="post-metadata">

**Author:** ![Admin1](https://avatars.discourse-cdn.com/v4/letter/a/bbce88/32.png) [@Admin1](https://forums.digi.com/u/Admin1)\
**Post date:** [February 25, 2009, 8:32pm UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563/4 "2009-02-25T20:32:06Z")

</div>

Check the WebUI of the Digi One SP under Configuration \> Serial Ports \> Port 1.

If you set the port profile as UDP Sockets, under the UDP Client section you can configure your multiple destinations.

---

<div class="post-metadata">

**Author:** ![lyonheart](https://avatars.discourse-cdn.com/v4/letter/l/f08c70/32.png) [@lyonheart](https://forums.digi.com/u/lyonheart)\
**Post date:** [February 26, 2009, 8:35am UTC](https://forums.digi.com/t/digione-sp-and-multiple-destination-ip-address/6563/5 "2009-02-26T08:35:16Z")

</div>

Ok thanks for the reply.  
I configured the UDP multicast and everything is working fine.

The only problem now is how to get the UDP data into my Vista PC. Do I need to install some specific driver on my computer to get the string from the device via UDP protocol (a driver like Digione Realport)?

Thanks in advance,  
Marco