# DigiPortTS

**URL:** <https://forums.digi.com/t/digiportts/6812>\
**Category:** Portserver TS\
**Created:** [July 14, 2005, 12:10am UTC](https://forums.digi.com/t/digiportts/6812 "2005-07-14T00:10:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JawnS](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JawnS](https://forums.digi.com/u/JawnS)\
**Post date:** [July 14, 2005, 12:10am UTC](https://forums.digi.com/t/digiportts/6812/1 "2005-07-14T00:10:44Z")

</div>

the power light is repeatedly blinking and the reset button wont reset, also the digi is unable to be discovered. tried with a crossover cable and on a network with the same subnet. any suggestions on what could be wrong or a way to fix this?

thanks

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [July 14, 2005, 12:01pm UTC](https://forums.digi.com/t/digiportts/6812/2 "2005-07-14T12:01:00Z")

</div>

Be sure to hold the reset button while powering on the unit. The button should be held for about 30 seconds.

If this does not recover the unit, please contact Tech. Support with the serial number from the unit and any LED blinking pattern seen:

[http://www.digi.com/support/eservice/eservicelogin.jsp](http://www.digi.com/support/eservice/eservicelogin.jsp)
