# discovering mode error  ,immediate  help me ...

**URL:** <https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963>\
**Category:** XBee & XBee Gateway\
**Tags:** firmware, mode, error, version, zigbee\
**Created:** [December 20, 2015, 2:56pm UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963 "2015-12-20T14:56:00Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 20, 2015, 2:56pm UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/1 "2015-12-20T14:56:00Z")

</div>

I am using an Arduino wireless shield. I had no problems before the change to API and the other Xbee s2 I have which is still in AT mode is recognized.

I get the following error:

could not find any device in COM 8\>error initializing xbee device parameters\>connection timeout \>Could not read Hardware and Firmware version.  
thanks for everthıng

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 21, 2015, 10:57am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/2 "2015-12-21T10:57:45Z")

</div>

What software is reporting this message?

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 21, 2015, 11:12am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/3 "2015-12-21T11:12:33Z")

</div>

I used to x-ctu

---

<div class="post-metadata">

**Author:** ![mahesh7393](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@mahesh7393](https://forums.digi.com/u/mahesh7393)\
**Post date:** [December 22, 2015, 7:57am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/4 "2015-12-22T07:57:17Z")

</div>

i have same problem.you can use x ctu legacy version for API mode

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 22, 2015, 7:57am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/5 "2015-12-22T07:57:38Z")

</div>

Yes you can.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 22, 2015, 7:59am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/6 "2015-12-22T07:59:38Z")

</div>

What do you have the XBee module mounted on? If it is not one of Digi’s interface boards, then you may be having issues with the board you are using not providing a connection from the PC to the module on all of the required lines such as DTR and RTS.

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 22, 2015, 8:21am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/7 "2015-12-22T08:21:26Z")

</div>

yes ,change at mode to apı mode

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 22, 2015, 8:21am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/8 "2015-12-22T08:21:32Z")

</div>

I use this module XBee shield [http://www.robotistan.com/orjinal-arduino-wireless-proto-xbee-sd-shield](http://www.robotistan.com/orjinal-arduino-wireless-proto-xbee-sd-shield)

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 22, 2015, 8:25am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/9 "2015-12-22T08:25:05Z")

</div>

The bulk of the Shields do not provide the necessary lines needed to change firmware. You need to contact the vendor of the shield for help in connecting the DTR and RTS lines if you want to change firmware using that board.

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 22, 2015, 8:29am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/10 "2015-12-22T08:29:51Z")

</div>

I take issue XBee explorer dongle reversible to buy ?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 22, 2015, 8:30am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/11 "2015-12-22T08:30:52Z")

</div>

You need to check with the manufacture of the board first to verify that the DTR and RTS lines are connected on it before you purchase it.

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [December 22, 2015, 2:08pm UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/12 "2015-12-22T14:08:25Z")

</div>

My English is not very good, ı don’t understand dtr ,rts ???

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 23, 2015, 7:46am UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/13 "2015-12-23T07:46:51Z")

</div>

These are the hardware flow control lines used in an RS232 or 3V CMOS connection. They are required lines for updating firmware on the XBee modules. Most Arduino or Shield boards don’t add them. They only connect the minimum lines needed for two way communications.

---

<div class="post-metadata">

**Author:** ![ferhat](https://avatars.discourse-cdn.com/v4/letter/f/58f4c7/32.png) [@ferhat](https://forums.digi.com/u/ferhat)\
**Post date:** [February 15, 2016, 3:56pm UTC](https://forums.digi.com/t/discovering-mode-error-immediate-help-me/15963/14 "2016-02-15T15:56:09Z")

</div>

solution : If with XBee explorer dongle firmware update it is done running smoothly.

arduino xbee shield does not allow firmware update.
