# Does the AnywhereUSB/14 device support SNMPv3 and IPV6?

**URL:** <https://forums.digi.com/t/does-the-anywhereusb-14-device-support-snmpv3-and-ipv6/12820>\
**Category:** USB\
**Tags:** anywhereusb14, snmpv3, ipv6\
**Created:** [April 15, 2014, 10:26am UTC](https://forums.digi.com/t/does-the-anywhereusb-14-device-support-snmpv3-and-ipv6/12820 "2014-04-15T10:26:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![stevenring61](https://avatars.discourse-cdn.com/v4/letter/s/8e7dd6/32.png) [@stevenring61](https://forums.digi.com/u/stevenring61)\
**Post date:** [April 15, 2014, 10:26am UTC](https://forums.digi.com/t/does-the-anywhereusb-14-device-support-snmpv3-and-ipv6/12820/1 "2014-04-15T10:26:49Z")

</div>

I have looked through documentaion and can not find if ANywhereUSB/14 supports SNMPv3 and IPV6. If it does not, is there a timeline on when both of these will be implemented?

---

<div class="post-metadata">

**Author:** ![sans0909](https://avatars.discourse-cdn.com/v4/letter/s/779978/32.png) [@sans0909](https://forums.digi.com/u/sans0909)\
**Post date:** [July 15, 2014, 1:55am UTC](https://forums.digi.com/t/does-the-anywhereusb-14-device-support-snmpv3-and-ipv6/12820/2 "2014-07-15T01:55:10Z")

</div>

SNMP functionality is limited for the AnywhereUSB G2 models.

1. The only traps that are available are discussed in the AnywhereUSB Installation Guide

2. The Alarm functions are applicable to the DB9 serial port, if you’re using the RealPort driver to connect that serial port to a computer over the network.