# Driver for Digi Multiport Serial Card 8

**URL:** <https://forums.digi.com/t/driver-for-digi-multiport-serial-card-8/7988>\
**Category:** USB Devices\
**Created:** [January 8, 2004, 2:11pm UTC](https://forums.digi.com/t/driver-for-digi-multiport-serial-card-8/7988 "2004-01-08T14:11:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [January 8, 2004, 2:11pm UTC](https://forums.digi.com/t/driver-for-digi-multiport-serial-card-8/7988/1 "2004-01-08T14:11:46Z")

</div>

Hi list,

I have some problems with compilation driver for Digi Multiport Serial Card 8.  
I have downloaded the driver: 40002369\_A.tgz from site,  
I make the process in the manual, and I don´t any idea  
about this error in compilation:

# ===== make[1]: Leaving directory `/work/dgnc-1.0/ditty' (cd dpa; make all) make[1]: Entering directory `/work/dgnc-1.0/dpa’ gcc -s -O2 -DLINUX -DNEO -DMRGDRV -DHELPDIR="/etc/dgnc/dpa" -I.. -I../include -I../driver/include -DDGNC\_LINUX -o dpa dpa.c attribs.o -lpanel -lcurses /usr/bin/ld: cannot find -lpanel collect2: ld returned 1 exit status make[1]: \*\*\* [dpa] Error 1 make[1]: Leaving directory `/work/dgnc-1.0/dpa’ make: \*\*\* [build] Error 2

System : RED HAT 8  
Kernel: kernel-2.4.18-14  
gcc-3.2-7

Thanks!

---

<div class="post-metadata">

**Author:** ![shatman](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@shatman](https://forums.digi.com/u/shatman)\
**Post date:** [January 8, 2004, 2:19pm UTC](https://forums.digi.com/t/driver-for-digi-multiport-serial-card-8/7988/2 "2004-01-08T14:19:01Z")

</div>

Depending on which Multiport Serial card you have, please follow one of the following install instructions:  
[http://support.digi.com/support/kbase/ta.php/linux/a\_cx/install/20021119122123/](http://support.digi.com/support/kbase/ta.php/linux/a_cx/install/20021119122123/)  
[http://support.digi.com/support/kbase/ta.php/linux/neo/install/20021219120607/](http://support.digi.com/support/kbase/ta.php/linux/neo/install/20021219120607/)  
[http://support.digi.com/support/kbase/ta.php/linux/xp/install/20021120095212/](http://support.digi.com/support/kbase/ta.php/linux/xp/install/20021120095212/)

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [January 8, 2004, 2:36pm UTC](https://forums.digi.com/t/driver-for-digi-multiport-serial-card-8/7988/3 "2004-01-08T14:36:58Z")

</div>

It appears as though the “./configure” command was not issued prior to the “make all”. Try running this command first.

Here are the steps shown in the Release Notes:

```
       1. tar xvfz 40002369_A.tgz
       2. cd ./dgnc-1.0
       3. ./configure
       4. make all
       5. make install

```
