# Drivers for windows 11

**URL:** <https://forums.digi.com/t/drivers-for-windows-11/28220>\
**Category:** XCTU\
**Tags:** xctu-v6, xctu, xbee\
**Created:** [October 30, 2023, 12:35pm UTC](https://forums.digi.com/t/drivers-for-windows-11/28220 "2023-10-30T12:35:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![spencerW](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@spencerW](https://forums.digi.com/u/spencerW)\
**Post date:** [October 30, 2023, 12:35pm UTC](https://forums.digi.com/t/drivers-for-windows-11/28220/1 "2023-10-30T12:35:33Z")

</div>

I have an XBee3 running the latest Zigbee firmware.

I also have windows 11, but in my XTCU program, when I want to add my Xbee module, the port is not recognized. I have a theory that can be the drivers, but I can’t find a solution yet. Does anyone solve this?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 31, 2023, 11:56am UTC](https://forums.digi.com/t/drivers-for-windows-11/28220/2 "2023-10-31T11:56:15Z")

</div>

What board do you have the XBee modules mounted on? If it is a Digi Development board, then using the USB drivers at [XCTU Support Resources](https://hub.digi.com/support/products/xctu/) can be used on all versions of Windows from Windows 98SE and above.