# EasyEDA footprint model for Xbee SX 900 RF radios

**URL:** <https://forums.digi.com/t/easyeda-footprint-model-for-xbee-sx-900-rf-radios/22693>\
**Category:** Interface/Development Boards\
**Tags:** footprint, pcb, easyeda, xbee-sx-900\
**Created:** [September 24, 2021, 1:17pm UTC](https://forums.digi.com/t/easyeda-footprint-model-for-xbee-sx-900-rf-radios/22693 "2021-09-24T13:17:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![blSwagger](https://avatars.discourse-cdn.com/v4/letter/b/90ced4/32.png) [@blSwagger](https://forums.digi.com/u/blSwagger)\
**Post date:** [September 24, 2021, 1:17pm UTC](https://forums.digi.com/t/easyeda-footprint-model-for-xbee-sx-900-rf-radios/22693/1 "2021-09-24T13:17:19Z")

</div>

Does anyone know where I can get a model for the footprint for a Xbee SX 900 RF radio? I am designing a PCB in EasyEDA to use with these radios and I want to program them before soldering them onto the board.

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 27, 2021, 9:52am UTC](https://forums.digi.com/t/easyeda-footprint-model-for-xbee-sx-900-rf-radios/22693/2 "2021-09-27T09:52:45Z")

</div>

There is an SMT footprint at [https://hub.digi.com/support/products/digi-xbee/digi-xbee-s2c/](https://hub.digi.com/support/products/digi-xbee/digi-xbee-s2c/) which is used on ALL of the XBee SMT products.