# Embedded C++ support in Digi ESP

**URL:** <https://forums.digi.com/t/embedded-c-support-in-digi-esp/4237>\
**Category:** Linux\
**Tags:** c\
**Created:** [July 10, 2010, 10:05pm UTC](https://forums.digi.com/t/embedded-c-support-in-digi-esp/4237 "2010-07-10T22:05:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![agrawal82](https://avatars.discourse-cdn.com/v4/letter/a/df788c/32.png) [@agrawal82](https://forums.digi.com/u/agrawal82)\
**Post date:** [July 10, 2010, 10:05pm UTC](https://forums.digi.com/t/embedded-c-support-in-digi-esp/4237/1 "2010-07-10T22:05:18Z")

</div>

Hello Digi ESP experts,

I am newbie using Digi ESP over Connect ME module and was curious to know about C++ support in ESP compilation environment.

Is there a document describing the C++ options supported by Digi ESP GNU tool chain? Is it a real EC++ compiler (a stripped down subset of full C++)?

Is this suitable for a UML based application development in embedded environment?

If any of you have some comments about memory requirement/ performance impact due to C++, please do share your experiences.

Thanks for your support.

Regards,  
Mayank