# End Device to Co-ordinator via two routers

**URL:** <https://forums.digi.com/t/end-device-to-co-ordinator-via-two-routers/19945>\
**Category:** XBee - 802.15.4\
**Tags:** mesh-network, xbee-s2c\
**Created:** [October 16, 2018, 9:17am UTC](https://forums.digi.com/t/end-device-to-co-ordinator-via-two-routers/19945 "2018-10-16T09:17:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chiradeep3110](https://avatars.discourse-cdn.com/v4/letter/c/45deac/32.png) [@chiradeep3110](https://forums.digi.com/u/chiradeep3110)\
**Post date:** [October 16, 2018, 9:17am UTC](https://forums.digi.com/t/end-device-to-co-ordinator-via-two-routers/19945/1 "2018-10-16T09:17:00Z")

</div>

Hello,  
I’m completely new to XBEE and want to create a sensor network like the following:

Co-ordinator -\> Router 1 -\> Router 2 -\> End Device 1 & End Device 2

Since the End Device 1 and 2 are out of sight from Co-ordinator hence the two routers are absolute necessary. I have 4 XBEE S2C Pro modules to complete my network.

If anyone can point me in the right direction it will be appreciated.