# end node of zibee can connect to different coordinator nodes with different pan id at different times?

**URL:** <https://forums.digi.com/t/end-node-of-zibee-can-connect-to-different-coordinator-nodes-with-different-pan-id-at-different-times/21631>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** arduino-xbee\
**Created:** [August 6, 2020, 11:43am UTC](https://forums.digi.com/t/end-node-of-zibee-can-connect-to-different-coordinator-nodes-with-different-pan-id-at-different-times/21631 "2020-08-06T11:43:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![amrita](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@amrita](https://forums.digi.com/u/amrita)\
**Post date:** [August 6, 2020, 11:43am UTC](https://forums.digi.com/t/end-node-of-zibee-can-connect-to-different-coordinator-nodes-with-different-pan-id-at-different-times/21631/1 "2020-08-06T11:43:38Z")

</div>

is it possible that a end device an connect to different coordinator nodes at different times using programming with arduino?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [August 6, 2020, 12:41pm UTC](https://forums.digi.com/t/end-node-of-zibee-can-connect-to-different-coordinator-nodes-with-different-pan-id-at-different-times/21631/2 "2020-08-06T12:41:53Z")

</div>

As long as you change the PAN ID to the desired value and you issue a network reset that should work.