# Filtered Network Discovery?

**URL:** <https://forums.digi.com/t/filtered-network-discovery/30665>\
**Category:** XBee & XBee Gateway\
**Created:** [April 22, 2024, 1:53pm UTC](https://forums.digi.com/t/filtered-network-discovery/30665 "2024-04-22T13:53:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jonbhanson](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/jonbhanson/32/3980_2.png) [@jonbhanson](https://forums.digi.com/u/jonbhanson)\
**Post date:** [April 22, 2024, 1:53pm UTC](https://forums.digi.com/t/filtered-network-discovery/30665/1 "2024-04-22T13:53:47Z")

</div>

I have a network that consists of two types of devices, let’s call them type A and type B. Is there any way to issue a network discovery command and only receive responses from device type B? Type A and B must still be on the same network together.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 22, 2024, 3:09pm UTC](https://forums.digi.com/t/filtered-network-discovery/30665/2 "2024-04-22T15:09:33Z")

</div>

No, the Node Discovery tool (ND) does not have the ability to limit to a given modem type to respond.

---

<div class="post-metadata">

**Author:** ![Jay](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/jay/32/104_2.png) [@Jay](https://forums.digi.com/u/Jay)\
**Post date:** [April 25, 2024, 11:04pm UTC](https://forums.digi.com/t/filtered-network-discovery/30665/3 "2024-04-25T23:04:13Z")

</div>

Hi Jon,  
YES, you can direct a node discovery on the ND command if the remote nodes have previously been assigned a node identifier (NI parameter).  
See the details here in the Digimesh product manual:  
[https://www.digi.com/resources/documentation/Digidocs/90002277/#Reference/r\_directed\_node\_discovery.htm](https://www.digi.com/resources/documentation/Digidocs/90002277/#Reference/r_directed_node_discovery.htm)

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 26, 2024, 3:38pm UTC](https://forums.digi.com/t/filtered-network-discovery/30665/4 "2024-04-26T15:38:39Z")

</div>

To be clear of what Jay is referring to. The radios all need to be Digi XBee modules using the same protocol. The radios for group 1 must have all the same NI value. Same for Group B. They must have a different NI value than Group A but all the same value.  
If you are mixing Manufactures, then no it is not possible.
