# Firmware Changing in XB3-24xxx Modules

**URL:** <https://forums.digi.com/t/firmware-changing-in-xb3-24xxx-modules/32371>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee3\
**Created:** [September 3, 2024, 5:04am UTC](https://forums.digi.com/t/firmware-changing-in-xb3-24xxx-modules/32371 "2024-09-03T05:04:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![arup.sarkar](https://avatars.discourse-cdn.com/v4/letter/a/c77e96/32.png) [@arup.sarkar](https://forums.digi.com/u/arup.sarkar)\
**Post date:** [September 3, 2024, 5:04am UTC](https://forums.digi.com/t/firmware-changing-in-xb3-24xxx-modules/32371/1 "2024-09-03T05:04:23Z")

</div>

Hi!  
As per the datasheet, **XB3-24DMST** supplied with DigiMesh firmware flashed into the module. During my product development phase if necessary, can I change the firmware to ‘ZB 3.0’ using XCTU? Please confirm.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 3, 2024, 12:34pm UTC](https://forums.digi.com/t/firmware-changing-in-xb3-24xxx-modules/32371/2 "2024-09-03T12:34:21Z")

</div>

Yes, you can use XCTU to change the firmware on the XB3-24 modules to any of the support options. This includes Zigbee, Digi Mesh or the 802.15.4 option.