# Firmware Upgrade

**URL:** <https://forums.digi.com/t/firmware-upgrade/2264>\
**Category:** XBee - Zigbee\
**Created:** [July 28, 2008, 10:49am UTC](https://forums.digi.com/t/firmware-upgrade/2264 "2008-07-28T10:49:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![treibeltattoo](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@treibeltattoo](https://forums.digi.com/u/treibeltattoo)\
**Post date:** [July 28, 2008, 10:49am UTC](https://forums.digi.com/t/firmware-upgrade/2264/1 "2008-07-28T10:49:10Z")

</div>

Hi  
i`m a degree student and need some help for my project. Is there any possibility to upgrade the firmware of a module (router/end device, with AT/transparent mode) to coordinators firmware.  
And how can i realise it without buy a interface board. I have download X-CTU software and need now information how to connect the module to com port manually.  
Pre-Thanks for help

---

<div class="post-metadata">

**Author:** ![16ksa23](https://avatars.discourse-cdn.com/v4/letter/1/aeb1de/32.png) [@16ksa23](https://forums.digi.com/u/16ksa23)\
**Post date:** [September 17, 2013, 5:18am UTC](https://forums.digi.com/t/firmware-upgrade/2264/2 "2013-09-17T05:18:04Z")

</div>

Without interface board you can update the firmware on a xbee module. But for this you need a gateway that is associated with the xbee module. Either from the web UI of the gateway or from Device Cloud you can update the firmware on the xbee module.