# Framing or timing control?

**URL:** <https://forums.digi.com/t/framing-or-timing-control/18737>\
**Category:** XBee - WiFi\
**Tags:** timing, frame-control, framing\
**Created:** [September 19, 2017, 10:21am UTC](https://forums.digi.com/t/framing-or-timing-control/18737 "2017-09-19T10:21:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![qualar](https://avatars.discourse-cdn.com/v4/letter/q/22d042/32.png) [@qualar](https://forums.digi.com/u/qualar)\
**Post date:** [September 19, 2017, 10:21am UTC](https://forums.digi.com/t/framing-or-timing-control/18737/1 "2017-09-19T10:21:57Z")

</div>

I want to encode binary data (not ASCII) from my microcontroller to my computer to make efficient use of available bandwidth.

Microcontroller -\> UART -\> Wifi XBee -\> TCP Socket -\> PC application

Presumably, there is no timing control? If I put a 5ms gap between frames of data, as frames are delayed across the wireless network these gaps can get much larger or much smaller?

Is there a way to either guarantee timing, or perhaps there is another way to identify the start of frames?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 19, 2017, 1:27pm UTC](https://forums.digi.com/t/framing-or-timing-control/18737/2 "2017-09-19T13:27:00Z")

</div>

No, TCP does not have a timing control protocol within it.
