# Frequency Hopping over 910MHz?

**URL:** <https://forums.digi.com/t/frequency-hopping-over-910mhz/2064>\
**Category:** XBee - Point-to-Point/Multi-Point\
**Created:** [January 20, 2009, 4:39pm UTC](https://forums.digi.com/t/frequency-hopping-over-910mhz/2064 "2009-01-20T16:39:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![smguest](https://avatars.discourse-cdn.com/v4/letter/s/c4cdca/32.png) [@smguest](https://forums.digi.com/u/smguest)\
**Post date:** [January 20, 2009, 4:39pm UTC](https://forums.digi.com/t/frequency-hopping-over-910mhz/2064/1 "2009-01-20T16:39:21Z")

</div>

Is there any way to configure the XBee-Pro 900 to hop over 910 MHz but still use the remaining spectrum? I haven’t found it in the documentation. I want to avoid transmitting on that frequency because that will impact a fixed frequency device already in use.

Thanks,  
smguest