# Gatting a response from XBEE Micro Mount 802.15.4 through SPI

**URL:** <https://forums.digi.com/t/gatting-a-response-from-xbee-micro-mount-802-15-4-through-spi/30028>\
**Category:** XBee - 802.15.4\
**Tags:** spi\
**Created:** [March 5, 2024, 8:17am UTC](https://forums.digi.com/t/gatting-a-response-from-xbee-micro-mount-802-15-4-through-spi/30028 "2024-03-05T08:17:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nono](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@Nono](https://forums.digi.com/u/Nono)\
**Post date:** [March 5, 2024, 8:17am UTC](https://forums.digi.com/t/gatting-a-response-from-xbee-micro-mount-802-15-4-through-spi/30028/1 "2024-03-05T08:17:11Z")

</div>

Hello,

I need help because I can’t manage to make my XBEE Micro Module communicate in SPI with a Cyclone III on a DB\_Start\_3C10 development board.  
I have placed the XBEE module on a XBEE development board and :

- pulled off the “UART DOUT” and “SPI\_SSEL” on reset and keep it off.

- sent a SPI\_Clock with valid Local AT Command ( x7E x00 x04 x08 x01 x53 x4C x57)

- set AP = 1

- turn off the UART dip switches

The Cyclone III works as a master, we generate the SPI\_CLK and send the frame through the SPI\_MOSI channel. But I still don’t receive any response from the slave through the SPI\_ATTN and SPI\_MISO channel.

Do you have any ideas for my issue ?

Thanks
