# Getting started digi xbee mesh - "MY Addres" not showing in XCTU?

**URL:** <https://forums.digi.com/t/getting-started-digi-xbee-mesh-my-addres-not-showing-in-xctu/28347>\
**Category:** XBee - DigiMesh\
**Created:** [November 8, 2023, 5:02pm UTC](https://forums.digi.com/t/getting-started-digi-xbee-mesh-my-addres-not-showing-in-xctu/28347 "2023-11-08T17:02:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![brccd](https://avatars.discourse-cdn.com/v4/letter/b/eb8c5e/32.png) [@brccd](https://forums.digi.com/u/brccd)\
**Post date:** [November 8, 2023, 5:02pm UTC](https://forums.digi.com/t/getting-started-digi-xbee-mesh-my-addres-not-showing-in-xctu/28347/1 "2023-11-08T17:02:22Z")

</div>

Trying to setup a transmit receive example with digi xbee mesh and in XCTU, there is no **MY** setting showing?  
I am running digi xbee mesh 2.4, firmware v 3012

What am I missing?

Is this automatically using the address on the back of the module and can’t be set?  
Thanks,  
Bert

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 13, 2023, 4:12pm UTC](https://forums.digi.com/t/getting-started-digi-xbee-mesh-my-addres-not-showing-in-xctu/28347/2 "2023-11-13T16:12:43Z")

</div>

You are not missing anything. Digi Mesh uses a 64 bit address function only which uses the SL/SH values as the source address. The MY function is a 16 bit address function that does not exists on Digi mesh.
