# Help Help,  PorServer2 16

**URL:** <https://forums.digi.com/t/help-help-porserver2-16/6607>\
**Category:** Portserver TS\
**Created:** [June 24, 2008, 8:52pm UTC](https://forums.digi.com/t/help-help-porserver2-16/6607 "2008-06-24T20:52:23Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![londo4](https://avatars.discourse-cdn.com/v4/letter/l/d07c76/32.png) [@londo4](https://forums.digi.com/u/londo4)\
**Post date:** [June 24, 2008, 8:52pm UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/1 "2008-06-24T20:52:23Z")

</div>

Hi help,  
I wantto use all ports on PortServer2 with 16 ports, Do I need to set a separet ipadress to each ports?

Thanks

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [June 24, 2008, 8:58pm UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/2 "2008-06-24T20:58:02Z")

</div>

No, you only need to assign one IP address to the unit itself and not the individual ports (although that can be done too).

How do you want to use the ports (COM or tty ports on host O.S., TCP socket, TCP tunnel, autotelnet, etc…)?

---

<div class="post-metadata">

**Author:** ![londo4](https://avatars.discourse-cdn.com/v4/letter/l/d07c76/32.png) [@londo4](https://forums.digi.com/u/londo4)\
**Post date:** [June 26, 2008, 4:20am UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/3 "2008-06-26T04:20:48Z")

</div>

userid0  
I Want to use AutoTelnet with Cisco Routers, how can I config it?

Message was edited by: londo4

Message was edited by: londo4

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [June 26, 2008, 1:00pm UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/4 "2008-06-26T13:00:36Z")

</div>

Sounds like you want to console manage the Routers. If so, the following document should be useful:

[http://ftp.digi.com/support/techsupport/hardware/portserver/rtelnet.html](http://ftp.digi.com/support/techsupport/hardware/portserver/rtelnet.html)

Also, you will need to use a special cable for connecting to Cisco Routers:

[http://supportold.digi.com/support/techsupport/common/cables/async/rj45-8pin-altpin--cisco-rj45-8pin.htm](http://supportold.digi.com/support/techsupport/common/cables/async/rj45-8pin-altpin--cisco-rj45-8pin.htm)

---

<div class="post-metadata">

**Author:** ![londo4](https://avatars.discourse-cdn.com/v4/letter/l/d07c76/32.png) [@londo4](https://forums.digi.com/u/londo4)\
**Post date:** [July 4, 2008, 10:10am UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/5 "2008-07-04T10:10:22Z")

</div>

Thank, its works.  
But now i got some question! my portserver works perfectly, I got two connections to the PortServr throu SecureCRT termina emulation to Pix Firewalls, How can disconnect the telnet sessions?

I try: quit, exit, Ctrl+[ non of those works. How can I disconnect telnet because I`m using SecureCRT terminal emulation?

Message was edited by: londo4

Message was edited by: londo4

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [July 7, 2008, 1:36pm UTC](https://forums.digi.com/t/help-help-porserver2-16/6607/6 "2008-07-07T13:36:02Z")

</div>

You will want to use ] to break out of the telnet session.