# hi ı want to create  sensor mesh network with three xbees2 as one of coordinator,one of router,one of end device?

**URL:** <https://forums.digi.com/t/hi-i-want-to-create-sensor-mesh-network-with-three-xbees2-as-one-of-coordinator-one-of-router-one-of-end-device/14976>\
**Category:** ZNet 2.5\
**Tags:** mesh, sensor, series2, xctu, xbee\
**Created:** [June 12, 2015, 9:13am UTC](https://forums.digi.com/t/hi-i-want-to-create-sensor-mesh-network-with-three-xbees2-as-one-of-coordinator-one-of-router-one-of-end-device/14976 "2015-06-12T09:13:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mhbalaman](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mhbalaman](https://forums.digi.com/u/mhbalaman)\
**Post date:** [June 12, 2015, 9:13am UTC](https://forums.digi.com/t/hi-i-want-to-create-sensor-mesh-network-with-three-xbees2-as-one-of-coordinator-one-of-router-one-of-end-device/14976/1 "2015-06-12T09:13:11Z")

</div>

ı confıgured xbees using with x-ctu as;  
Coordinator;  
Firmware:zigbee coordnator apı  
PAN ID:0  
SCAN CHANNELS:1FFE  
OP ID:799142BCC8A(automatşcally assigned)  
ch:7(automatşcally assigned)  
sh:13a200  
sl:40e66e4f  
my:0(automatic)  
dh:0  
dl:ffff  
apı:1  
router  
Firmware:zigbee router at  
PAN ID:0  
SCAN CHANNELS:1FFE  
OP ID:0(automatşcally assigned)  
ch:0(automatşcally assigned)  
sh:13a200  
sl:40cc0046  
my:fffe(automatic)  
dh:13a200  
dl:40e66e4f  
d3:adc  
ır:64  
end device  
Firmware:zigbee end device at  
PAN ID:0  
SCAN CHANNELS:1FFE  
OP ID:0(automatşcally assigned)  
ch:0(automatşcally assigned)  
sh:13a200  
sl:40cc015b  
my:fffe(automatic)  
dh:13a200  
dl:40c0046  
d2:adc  
ır:64  
cycle sleep mode

ın this confıuration,there are one sensor in router and end device.ı took apı frame from router but ı didnt take apı frame from end devide.router cant send the end device ınformatıon.  
How can you solve this situation?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [June 12, 2015, 2:00pm UTC](https://forums.digi.com/t/hi-i-want-to-create-sensor-mesh-network-with-three-xbees2-as-one-of-coordinator-one-of-router-one-of-end-device/14976/2 "2015-06-12T14:00:53Z")

</div>

Are you using hardware flow control on the End device and your device connected to the end device?

---

<div class="post-metadata">

**Author:** ![mhbalaman](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mhbalaman](https://forums.digi.com/u/mhbalaman)\
**Post date:** [June 15, 2015, 7:27am UTC](https://forums.digi.com/t/hi-i-want-to-create-sensor-mesh-network-with-three-xbees2-as-one-of-coordinator-one-of-router-one-of-end-device/14976/3 "2015-06-15T07:27:43Z")

</div>

ı made cts flow control form digital pın in end device.End devic only connected to sensor.
