# HOME AUTOMATION how to control the HA certified light after conected to Xbee pro S2c

**URL:** <https://forums.digi.com/t/home-automation-how-to-control-the-ha-certified-light-after-conected-to-xbee-pro-s2c/17447>\
**Category:** XBee & XBee Gateway\
**Tags:** profile, home, automation\
**Created:** [September 23, 2016, 10:52am UTC](https://forums.digi.com/t/home-automation-how-to-control-the-ha-certified-light-after-conected-to-xbee-pro-s2c/17447 "2016-09-23T10:52:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![hanukanth](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@hanukanth](https://forums.digi.com/u/hanukanth)\
**Post date:** [September 23, 2016, 10:52am UTC](https://forums.digi.com/t/home-automation-how-to-control-the-ha-certified-light-after-conected-to-xbee-pro-s2c/17447/1 "2016-09-23T10:52:39Z")

</div>

it was sending data through RF but wrong Destination & source End points along with wrong profile id(Xbee pro default id 0x0011) NOT home automation profile id(0x0104)

However,while sending ZDP requests we must enable the APS Encryption,therefore how it will understand the details which are required for the control the HA device through the RF transmit API frame

can anyone explain in detail.

thanks in advance.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 23, 2016, 3:28pm UTC](https://forums.digi.com/t/home-automation-how-to-control-the-ha-certified-light-after-conected-to-xbee-pro-s2c/17447/2 "2016-09-23T15:28:32Z")

</div>

The explicit frame allows you to send and receive ZDO commands as needed. For example, the explicit frame allows you to tell that packet exactly what destination End point and source end pint the data is going to be coming from. It also allows you to provide it with a Profile ID. Something that the standard API does not.

---

<div class="post-metadata">

**Author:** ![hanukanth](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@hanukanth](https://forums.digi.com/u/hanukanth)\
**Post date:** [September 26, 2016, 8:58am UTC](https://forums.digi.com/t/home-automation-how-to-control-the-ha-certified-light-after-conected-to-xbee-pro-s2c/17447/3 "2016-09-26T08:58:36Z")

</div>

thanks dude it’s working…