# Home automation profile on Xbee S2C wire antenna module

**URL:** <https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984>\
**Category:** XBee & XBee Gateway\
**Tags:** profile, home, automation, zigbee\
**Created:** [December 12, 2019, 10:36am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984 "2019-12-12T10:36:45Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![gsshewalkar](https://avatars.discourse-cdn.com/v4/letter/g/d6d6ee/32.png) [@gsshewalkar](https://forums.digi.com/u/gsshewalkar)\
**Post date:** [December 12, 2019, 10:36am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/1 "2019-12-12T10:36:45Z")

</div>

I want to know how to configure Xbee S2C wire antenna module with HA (Home automation) profile via XCTU or any other way. Could you all please assist with details?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 12, 2019, 3:08pm UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/2 "2019-12-12T15:08:51Z")

</div>

Take a look at [https://www.digi.com/support/knowledge-base/zigbee-home-automation](https://www.digi.com/support/knowledge-base/zigbee-home-automation)

---

<div class="post-metadata">

**Author:** ![gsshewalkar](https://avatars.discourse-cdn.com/v4/letter/g/d6d6ee/32.png) [@gsshewalkar](https://forums.digi.com/u/gsshewalkar)\
**Post date:** [December 13, 2019, 8:22am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/3 "2019-12-13T08:22:36Z")

</div>

Thanks mvut for the kind response.  
It’s done. Function set for firmware is ZIGBEE TH REG. I hope that’s correct.

---

<div class="post-metadata">

**Author:** ![asgm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/asgm/32/3688_2.png) [@asgm](https://forums.digi.com/u/asgm)\
**Post date:** [December 13, 2019, 3:56am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/4 "2019-12-13T03:56:15Z")

</div>

Link shared by mvut should help you connect Digi S2C module with HA network. However, since is module is mere “HA Ready”, you have to connect some MCU to handle all HA specific commands and queries.

---

<div class="post-metadata">

**Author:** ![gsshewalkar](https://avatars.discourse-cdn.com/v4/letter/g/d6d6ee/32.png) [@gsshewalkar](https://forums.digi.com/u/gsshewalkar)\
**Post date:** [December 13, 2019, 8:22am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/5 "2019-12-13T08:22:46Z")

</div>

Okay. Yes I have connected xbee to host MCU and I want my xbee to communicate with external non digi zigbee device.

Please correct me but if other device (which is coordinator) is already in HA network, then pairing process between xbee and external device would automatically happen or what are the steps from xbee side to accomplish the pairing and join the network?

---

<div class="post-metadata">

**Author:** ![Lugubrious](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@Lugubrious](https://forums.digi.com/u/Lugubrious)\
**Post date:** [January 23, 2020, 10:34am UTC](https://forums.digi.com/t/home-automation-profile-on-xbee-s2c-wire-antenna-module/20984/6 "2020-01-23T10:34:29Z")

</div>

I configured my Xbee S2C antenna module with Home automation profile via XCTU with the solution provided on the link on earlier comment.