# How do I connect an I2C device to an Xbee Pro 900HP programmable?

**URL:** <https://forums.digi.com/t/how-do-i-connect-an-i2c-device-to-an-xbee-pro-900hp-programmable/15302>\
**Category:** XBee - Point-to-Point/Multi-Point\
**Tags:** i2c, programmable, xbee-900hp\
**Created:** [August 20, 2015, 1:07pm UTC](https://forums.digi.com/t/how-do-i-connect-an-i2c-device-to-an-xbee-pro-900hp-programmable/15302 "2015-08-20T13:07:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![michaelsv](https://avatars.discourse-cdn.com/v4/letter/m/77aa72/32.png) [@michaelsv](https://forums.digi.com/u/michaelsv)\
**Post date:** [August 20, 2015, 1:07pm UTC](https://forums.digi.com/t/how-do-i-connect-an-i2c-device-to-an-xbee-pro-900hp-programmable/15302/1 "2015-08-20T13:07:46Z")

</div>

Many low-power sensors have only an I2C connection…how do I connect one of these sensors to an Xbee Pro 900HP programmable? If not supported out of the box, is there sample code or a library to use some I/O pins for that purpose?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 1, 2015, 11:08am UTC](https://forums.digi.com/t/how-do-i-connect-an-i2c-device-to-an-xbee-pro-900hp-programmable/15302/2 "2015-09-01T11:08:29Z")

</div>

Yes there are sample applications found in the FreeScale XBee SDK that allows you to use one or more of the radios/freescales ADC/DIO lines for this purpose.
