# How do you reset XBee Module - Series 1 - 1mW with Wire Antenna?

**URL:** <https://forums.digi.com/t/how-do-you-reset-xbee-module-series-1-1mw-with-wire-antenna/17911>\
**Category:** XBee & XBee Gateway\
**Tags:** reset, xbee\
**Created:** [January 19, 2017, 10:53am UTC](https://forums.digi.com/t/how-do-you-reset-xbee-module-series-1-1mw-with-wire-antenna/17911 "2017-01-19T10:53:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jdpville](https://avatars.discourse-cdn.com/v4/letter/j/2acd7d/32.png) [@jdpville](https://forums.digi.com/u/jdpville)\
**Post date:** [January 19, 2017, 10:53am UTC](https://forums.digi.com/t/how-do-you-reset-xbee-module-series-1-1mw-with-wire-antenna/17911/1 "2017-01-19T10:53:17Z")

</div>



---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [January 19, 2017, 11:03am UTC](https://forums.digi.com/t/how-do-you-reset-xbee-module-series-1-1mw-with-wire-antenna/17911/2 "2017-01-19T11:03:29Z")

</div>

If you just mean reset, then it is as simple as taking the reset line and connecting it to ground for a few ms.

If you mean Restore the firmware to the defaults configuration, that is done by the ATRE command or using the Restore function in XCTU.