# How to configure a Mesh network using Xbee XS (XB9X-DMUS-001)?

**URL:** <https://forums.digi.com/t/how-to-configure-a-mesh-network-using-xbee-xs-xb9x-dmus-001/20721>\
**Category:** XBee - DigiMesh\
**Tags:** digimesh-xbee-sx\
**Created:** [August 23, 2019, 2:10pm UTC](https://forums.digi.com/t/how-to-configure-a-mesh-network-using-xbee-xs-xb9x-dmus-001/20721 "2019-08-23T14:10:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Emilio303](https://avatars.discourse-cdn.com/v4/letter/e/57b2e6/32.png) [@Emilio303](https://forums.digi.com/u/Emilio303)\
**Post date:** [August 23, 2019, 2:10pm UTC](https://forums.digi.com/t/how-to-configure-a-mesh-network-using-xbee-xs-xb9x-dmus-001/20721/1 "2019-08-23T14:10:40Z")

</div>

I’m trying to make a Mesh network using Xbee SX (XB9X-DMUS-001) but I can’t find many information about it, I found a guide but it was using Xbee PRO S2C and DigiMesh 2.4 TH firmware which it’s not available for this module.

Thanks in advance.