# How to configure digimesh 2.4 for at least 5 nodes in Digimesh network using Xbee SC2 modules??

**URL:** https://forums.digi.com/t/how-to-configure-digimesh-2-4-for-at-least-5-nodes-in-digimesh-network-using-xbee-sc2-modules/19666
**Category:** XBee - DigiMesh
**Tags:** digimesh
**Created:** [June 28, 2018, 4:49pm UTC](https://forums.digi.com/t/how-to-configure-digimesh-2-4-for-at-least-5-nodes-in-digimesh-network-using-xbee-sc2-modules/19666 "2018-06-28T16:49:52Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![lavanya](https://avatars.discourse-cdn.com/v4/letter/l/df788c/32.png) [@lavanya](https://forums.digi.com/u/lavanya)
#### Post date: [June 28, 2018, 4:49pm UTC](https://forums.digi.com/t/how-to-configure-digimesh-2-4-for-at-least-5-nodes-in-digimesh-network-using-xbee-sc2-modules/19666/1 "2018-06-28T16:49:52Z")

</div>

Hi,

I am Using Xbee SC2 module, I could achieve ring topology using three modules. How to get the three modules working in a mesh topology. I did follow the Digimesh User guide and failed at it.