# How to configure one XSTICK as coordinator and another XSTICK as router/enddevice **URL:** \ **Category:** XBee & XBee Gateway\ **Tags:** xstick\ **Created:** [May 21, 2015, 8:32am UTC](https://forums.digi.com/t/how-to-configure-one-xstick-as-coordinator-and-another-xstick-as-router-enddevice/14864 "2015-05-21T08:32:47Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![gdoraisa](https://avatars.discourse-cdn.com/v4/letter/g/4da419/32.png) [@gdoraisa](https://forums.digi.com/u/gdoraisa)\ **Post date:** [May 21, 2015, 8:32am UTC](https://forums.digi.com/t/how-to-configure-one-xstick-as-coordinator-and-another-xstick-as-router-enddevice/14864/1 "2015-05-21T08:32:47Z")
Is there a setup instruction that explains how to setup using XCTU a simple Zigbee network (one AT coordinator and one AT router).The XCTU program is more GUI friendly but no matter what I do, I could not get on XSTICK configured as AT coordinator to communicate another XSTICK configured as AT router. I tried making the DH/DL but still the data from coordinator not showing up on router as serial console is monitored. The is no document on setting a simple network of two device so beginner can learn. ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [May 29, 2015, 9:39am UTC](https://forums.digi.com/t/how-to-configure-one-xstick-as-coordinator-and-another-xstick-as-router-enddevice/14864/2 "2015-05-29T09:39:26Z")
Have you tried the product manual or [http://knowledge.digi.com/articles/Knowledge\_Base\_Article/Range-Testing-with-a-ZigBee-Mesh-Network](http://knowledge.digi.com/articles/Knowledge_Base_Article/Range-Testing-with-a-ZigBee-Mesh-Network) ? Try restoring everything to defaults then issue a local network reset on the Coordinator and then Router (ATNR0)