# How to configure Zigbee s2c as end device

**URL:** <https://forums.digi.com/t/how-to-configure-zigbee-s2c-as-end-device/18023>\
**Category:** Plug N' Play\
**Tags:** xbee-pro-s2c\
**Created:** [February 13, 2017, 9:10am UTC](https://forums.digi.com/t/how-to-configure-zigbee-s2c-as-end-device/18023 "2017-02-13T09:10:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![anshumantech](https://avatars.discourse-cdn.com/v4/letter/a/848f3c/32.png) [@anshumantech](https://forums.digi.com/u/anshumantech)\
**Post date:** [February 13, 2017, 9:10am UTC](https://forums.digi.com/t/how-to-configure-zigbee-s2c-as-end-device/18023/1 "2017-02-13T09:10:53Z")

</div>

Previously, I am using X-CTU version 5.2.8.6 to configure Zigbee module ‘S2’ as END Device or Router now I am using 6.3.0 version of X-CTU to configure Zigbee module ‘S2C’, but not able to configure as END Device / Router. i.e ‘function set’ is not getting changed to ‘END Device’ / Router.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [February 13, 2017, 9:35am UTC](https://forums.digi.com/t/how-to-configure-zigbee-s2c-as-end-device/18023/2 "2017-02-13T09:35:26Z")

</div>

Simple, enable the sleep mode function (SM).
