# How to disable xbee pro s2c boost mode

**URL:** <https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** pro, s2c, xbee\
**Created:** [September 10, 2020, 10:33am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760 "2020-09-10T10:33:06Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 10, 2020, 10:33am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/1 "2020-09-10T10:33:06Z")

</div>

I am using xbee pro s2c in boost mode where Tx\_power is 18dB, but i want to set it on 5 or 8dB so for that i need to disable boost mode.

I have tried sending AT command PM (Power Mode) but i am getting status error time i tried.

1. How to disable that mode?
2. As per datasheet at 18dB xbee should consume 120mA current but mine is taking only 30 to 45mA max why?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 10, 2020, 10:38am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/2 "2020-09-10T10:38:15Z")

</div>

Use the following commands\>

+++  
ok  
ATPL0  
ok  
ATPPM0  
ok  
ATWR  
ok

The radio is transmitting at 250Kbps. Unless you are using the proper hardware, you are not going to see the peak current draw when it is transmitting.

---

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 11, 2020, 9:42am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/3 "2020-09-11T09:42:25Z")

</div>

I have tried AT command as you said but I am getting an ERROR in response whenever I hit the ATPM0 or ATPPM0 command.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 11, 2020, 9:48am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/4 "2020-09-11T09:48:28Z")

</div>

What firmware version are you working with?

---

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 11, 2020, 10:22am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/5 "2020-09-11T10:22:16Z")

</div>

I have tried on 4060 and 4061 fw version.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 11, 2020, 10:24am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/6 "2020-09-11T10:24:16Z")

</div>

What do you get if you simply issue the ATPM ?

---

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 11, 2020, 2:58pm UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/7 "2020-09-11T14:58:00Z")

</div>

I got 1 in the response of ATPM

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 11, 2020, 3:00pm UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/8 "2020-09-11T15:00:07Z")

</div>

Ok so now do the same thing. This time with a zero. So it looks like:

ATPM0

---

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 14, 2020, 9:04am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/9 "2020-09-14T09:04:59Z")

</div>

I have tried that ATPM0 or ATPM1 in both the case i am getting ERROR in response.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 14, 2020, 9:14am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/10 "2020-09-14T09:14:19Z")

</div>

What does ATVR report?

---

<div class="post-metadata">

**Author:** ![bhavitrajput](https://avatars.discourse-cdn.com/v4/letter/b/5f8ce5/32.png) [@bhavitrajput](https://forums.digi.com/u/bhavitrajput)\
**Post date:** [September 15, 2020, 9:46am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/11 "2020-09-15T09:46:14Z")

</div>

ATVR Response is 4061.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 15, 2020, 11:22am UTC](https://forums.digi.com/t/how-to-disable-xbee-pro-s2c-boost-mode/21760/12 "2020-09-15T11:22:43Z")

</div>

I would suggest contacting Digi support via email at [tech.support@digi.com](mailto:tech.support@digi.com). Make sure you include the full part number, firmware version and serial number for the device that is having issues.
