# how to interface LCD 122x32 with rabbit 4300?

**URL:** <https://forums.digi.com/t/how-to-interface-lcd-122x32-with-rabbit-4300/9058>\
**Category:** Rabbit\
**Created:** [February 16, 2012, 8:24am UTC](https://forums.digi.com/t/how-to-interface-lcd-122x32-with-rabbit-4300/9058 "2012-02-16T08:24:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![amey](https://avatars.discourse-cdn.com/v4/letter/a/a8b319/32.png) [@amey](https://forums.digi.com/u/amey)\
**Post date:** [February 16, 2012, 8:24am UTC](https://forums.digi.com/t/how-to-interface-lcd-122x32-with-rabbit-4300/9058/1 "2012-02-16T08:24:13Z")

</div>

i am working on the sample codes provided in DC 10.66  
DCRABBIT\_10.64/SAMPLES/LCD\_KEYPAD/122X32\_1X7/TCPIP/TCP\_RESPOND.C  
how can i interface the LCD I/O lines with rabbit 4300 module specified in the program. i need the exact port pins to which i should solder my LCD. if any one has interfaced LCD with rabbit module please tell me how can i configure i/o pins of rabbit.