# How to poll remote I/O states using multiple xbee s6b connected across single network ?

**URL:** <https://forums.digi.com/t/how-to-poll-remote-i-o-states-using-multiple-xbee-s6b-connected-across-single-network/19720>\
**Category:** Python\
**Tags:** xbee-s6b, python\
**Created:** [July 17, 2018, 4:28pm UTC](https://forums.digi.com/t/how-to-poll-remote-i-o-states-using-multiple-xbee-s6b-connected-across-single-network/19720 "2018-07-17T16:28:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hitheshkaranth](https://avatars.discourse-cdn.com/v4/letter/h/a698b9/32.png) [@Hitheshkaranth](https://forums.digi.com/u/Hitheshkaranth)\
**Post date:** [July 17, 2018, 4:28pm UTC](https://forums.digi.com/t/how-to-poll-remote-i-o-states-using-multiple-xbee-s6b-connected-across-single-network/19720/1 "2018-07-17T16:28:39Z")

</div>

Greetings,

I did manage to setup and communicate commands over the local network(access point) using x-ctu where each Xbee S6B node was configured under STA in infrastructure mode. Can any one guide me how can this be done programatically using python ?

Thanks in advance!