# how to send a file of 6 KB over xbee s2 series?

**URL:** <https://forums.digi.com/t/how-to-send-a-file-of-6-kb-over-xbee-s2-series/11858>\
**Category:** XBee & XBee Gateway\
**Tags:** s2, raspberry, pi, python, xbee\
**Created:** [August 19, 2013, 1:11am UTC](https://forums.digi.com/t/how-to-send-a-file-of-6-kb-over-xbee-s2-series/11858 "2013-08-19T01:11:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![purnima](https://avatars.discourse-cdn.com/v4/letter/p/49beb7/32.png) [@purnima](https://forums.digi.com/u/purnima)\
**Post date:** [August 19, 2013, 1:11am UTC](https://forums.digi.com/t/how-to-send-a-file-of-6-kb-over-xbee-s2-series/11858/1 "2013-08-19T01:11:23Z")

</div>

I am trying to send a file of size 6 KB over the xbee module using raspberry pi. If i send the file all at once, it takes me about 3 seconds to receive the file. How should i efficiently send the file over less than a minute because i guess 35 KB can be sent per second(250 kbps).

---

<div class="post-metadata">

**Author:** ![jeremy](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jeremy](https://forums.digi.com/u/jeremy)\
**Post date:** [August 19, 2013, 2:01pm UTC](https://forums.digi.com/t/how-to-send-a-file-of-6-kb-over-xbee-s2-series/11858/2 "2013-08-19T14:01:53Z")

</div>

I would guess that you are broadcasting to all radios. When broadcasting packets on the series 2 you are limited to about one packet per second. Check that you have a destination set (DH, DL) to improve your speed.
