# How to set-up Connect Core 6 SBC for WLAN access point ?

**URL:** <https://forums.digi.com/t/how-to-set-up-connect-core-6-sbc-for-wlan-access-point/17178>\
**Category:** Linux\
**Tags:** connectcore6, yocto\
**Created:** [August 2, 2016, 8:00am UTC](https://forums.digi.com/t/how-to-set-up-connect-core-6-sbc-for-wlan-access-point/17178 "2016-08-02T08:00:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shingo](https://avatars.discourse-cdn.com/v4/letter/s/f475e1/32.png) [@shingo](https://forums.digi.com/u/shingo)\
**Post date:** [August 2, 2016, 8:00am UTC](https://forums.digi.com/t/how-to-set-up-connect-core-6-sbc-for-wlan-access-point/17178/1 "2016-08-02T08:00:58Z")

</div>

Now I try to set-up WLAN0 access-point on Connect Core 6 SBC.

I create image based on fsl-image-multimedia-full.

And add conf/local.conf

EXTRA\_IMAGE\_FEATURE = " … dey-network … "

IMAGE\_INSTALL\_append = " hostap "

root@ccimx6sbc:~# /etc/init.d/hostapd restart  
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 1148)  
hostapd.  
Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf  
Using interface wlan0 with hwaddr 00:04:f3:ff:ff:fb and ssid “test”  
wlan0: interface state UNINITIALIZED-\>ENABLED  
wlan0: AP-ENABLED  
hostapd.

root@ccimx6sbc:~# iwconfig wlan0  
wlan0 IEEE 802.11abgn Mode:Master Tx-Power=17 dBm  
Retry short limit:7 RTS thr:off Fragment thr:off  
Power Management:on

root@ccimx6sbc:~#

On Windows-PC search ssid “test”, but can not connection.

I want to connect PC to CC6-SBC-server by wireless-LAN.

Run http server on CC6SBC, and PC access by web-browser.

So, Any other packages are needed ?

Please help.

---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [August 3, 2016, 4:29am UTC](https://forums.digi.com/t/how-to-set-up-connect-core-6-sbc-for-wlan-access-point/17178/2 "2016-08-03T04:29:34Z")

</div>

Hello, It seems like your question is not clear?  
You want to use cc6 as a AccessPoint OR CC6 as a web server?  
Go through the below link, it may helpful.

[http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#reference/yocto/r\_network\_bridging.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto|System%2520development|Technical%2520notes|\_\_\_\_\_2](http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#reference/yocto/r_network_bridging.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CSystem%2520development%7CTechnical%2520notes%7C _____ 2)