# How to "sniff" the zigbee network - confirm sent of packet

**URL:** <https://forums.digi.com/t/how-to-sniff-the-zigbee-network-confirm-sent-of-packet/540>\
**Category:** XBee - Zigbee\
**Created:** [March 8, 2010, 11:54am UTC](https://forums.digi.com/t/how-to-sniff-the-zigbee-network-confirm-sent-of-packet/540 "2010-03-08T11:54:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![efhache](https://avatars.discourse-cdn.com/v4/letter/e/8e7dd6/32.png) [@efhache](https://forums.digi.com/u/efhache)\
**Post date:** [March 8, 2010, 11:54am UTC](https://forums.digi.com/t/how-to-sniff-the-zigbee-network-confirm-sent-of-packet/540/1 "2010-03-08T11:54:00Z")

</div>

I used with a data logger an Xbee Pro serie 2 module (OEM).  
I can receive message from digi sensor and an 0x95 API message from a embedded system with xbee pro serie 2 too. (works with a LPC µcontroller).

During debug on LPC, I can see message from digi. But I can see transmit from logger (master / coordinator)

Debug on LPC say that message are transmit on the UART port to the ZB pro module. But I can’t see message.

I would like to be sure that the packet are sent. How can I view all transmitted packet on the zigbee network.

I can see all connected device / router woth the X-CTU application. But I’d like also view the transmit data.

Is it possible ? How ??

---

<div class="post-metadata">

**Author:** ![efhache](https://avatars.discourse-cdn.com/v4/letter/e/8e7dd6/32.png) [@efhache](https://forums.digi.com/u/efhache)\
**Post date:** [March 10, 2010, 4:33pm UTC](https://forums.digi.com/t/how-to-sniff-the-zigbee-network-confirm-sent-of-packet/540/2 "2010-03-10T16:33:32Z")

</div>

some body can help me ??