# HP-USB-14 - Individual port power management - can USB ports be turned on and off via an attached PC?

**URL:** <https://forums.digi.com/t/hp-usb-14-individual-port-power-management-can-usb-ports-be-turned-on-and-off-via-an-attached-pc/21512>\
**Category:** USB\
**Tags:** hubport\
**Created:** [June 30, 2020, 9:49am UTC](https://forums.digi.com/t/hp-usb-14-individual-port-power-management-can-usb-ports-be-turned-on-and-off-via-an-attached-pc/21512 "2020-06-30T09:49:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael\_Carroll](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@Michael\_Carroll](https://forums.digi.com/u/Michael_Carroll)\
**Post date:** [June 30, 2020, 9:49am UTC](https://forums.digi.com/t/hp-usb-14-individual-port-power-management-can-usb-ports-be-turned-on-and-off-via-an-attached-pc/21512/1 "2020-06-30T09:49:22Z")

</div>

Hi all, the product description for the HubPort family says they have “Individual port power management,” can I turn the ports on and off from the PC they are attached to? I have a need to enable and disable the ports, to force a disconnect and reconnect of the attached USB devices.

Thanks in advance,  
Michael

---

<div class="post-metadata">

**Author:** ![Campbell](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Campbell](https://forums.digi.com/u/Campbell)\
**Post date:** [July 2, 2020, 2:29pm UTC](https://forums.digi.com/t/hp-usb-14-individual-port-power-management-can-usb-ports-be-turned-on-and-off-via-an-attached-pc/21512/2 "2020-07-02T14:29:28Z")

</div>

Looks like you can on page 6 to 10 it shows different ways of enabling or disabling each port  
[http://ftp1.digi.com/support/documentation/90000410\_E.pdf](http://ftp1.digi.com/support/documentation/90000410_E.pdf)

---

<div class="post-metadata">

**Author:** ![Michael\_Carroll](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@Michael\_Carroll](https://forums.digi.com/u/Michael_Carroll)\
**Post date:** [July 7, 2020, 1:30pm UTC](https://forums.digi.com/t/hp-usb-14-individual-port-power-management-can-usb-ports-be-turned-on-and-off-via-an-attached-pc/21512/3 "2020-07-07T13:30:57Z")

</div>

Thanks for taking the time to answer Campbell!

I’m just not 100% sure if that applies to the USB HP-USB-14, or if it’s only for the Edgeport serial hubs and /c USB hubs. It does mentions the Hubport/4c+ on page 5 in the heading, but I’m not 100% confident it will apply to the HP-USB-14(no c suffix.)

I’m also concerned how old that document is since all the OS’s mentioned are not relevant anymore.

I did find this one:  
[https://www.digi.com/resources/documentation/digidocs/pdfs/90000403.pdf](https://www.digi.com/resources/documentation/digidocs/pdfs/90000403.pdf)

But it also only briefly mentions Hubports in passing, with a note on page 25 for Hubports with a /c suffix.

So I’m confused, I might try and obtain the edgeport utility and see if it has a dropdown list of supported Hubports or similar.

Thanks again  
Michael
