# HPUX 11.23 error message to load drivers

**URL:** <https://forums.digi.com/t/hpux-11-23-error-message-to-load-drivers/7997>\
**Category:** USB Devices\
**Created:** [June 3, 2010, 11:37pm UTC](https://forums.digi.com/t/hpux-11-23-error-message-to-load-drivers/7997 "2010-06-03T23:37:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nathanl\_at\_tsa.com](https://avatars.discourse-cdn.com/v4/letter/n/e9c0ed/32.png) [@nathanl\_at\_tsa.com](https://forums.digi.com/u/nathanl_at_tsa.com)\
**Post date:** [June 3, 2010, 11:37pm UTC](https://forums.digi.com/t/hpux-11-23-error-message-to-load-drivers/7997/1 "2010-06-03T23:37:43Z")

</div>

I have an HP RX2660 server running HP-UX 11.23 and I am trying to load the drivers for the AccelePort Xr 920 Universal PCI (3.3V & 5V) 2-port RS-232 DB-9M on board 77000573.  
It is giving me an error message when I run the swinstall.  
“Currently, there are no products on this source which are compatible with the target. Therefore, no products are shown.”  
This is a beta test for a serial card for 100-200 servers.  
Need a little help.

---

<div class="post-metadata">

**Author:** ![userid0](https://avatars.discourse-cdn.com/v4/letter/u/f6c823/32.png) [@userid0](https://forums.digi.com/u/userid0)\
**Post date:** [June 4, 2010, 3:43pm UTC](https://forums.digi.com/t/hpux-11-23-error-message-to-load-drivers/7997/2 "2010-06-04T15:43:40Z")

</div>

There is no driver support under HPUX 11.23 or 11.31. Itanium support is not available.

There are a couple different options:

1. HP has an OEM version of the adapter with a built-in driver that supports the board under 11.23/11.31 on the Itanium.

You could buy the card from HP, and it would work.

1. You could purchase a Digi Terminal Server (ethernet based product), and use RealPort.

2. Contact your Digi Sales Representative for alternatives or to pursue a Special Project Request for possible driver support development.