# I want to access for CC6 by Wifi (PC or Android-Tablet).

**URL:** <https://forums.digi.com/t/i-want-to-access-for-cc6-by-wifi-pc-or-android-tablet/17199>\
**Category:** Linux\
**Tags:** wifi, wifi-access-point, connectcore6, wlan0\
**Created:** [August 4, 2016, 9:57pm UTC](https://forums.digi.com/t/i-want-to-access-for-cc6-by-wifi-pc-or-android-tablet/17199 "2016-08-04T21:57:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![shingo](https://avatars.discourse-cdn.com/v4/letter/s/f475e1/32.png) [@shingo](https://forums.digi.com/u/shingo)\
**Post date:** [August 4, 2016, 9:57pm UTC](https://forums.digi.com/t/i-want-to-access-for-cc6-by-wifi-pc-or-android-tablet/17199/1 "2016-08-04T21:57:57Z")

</div>

Thanks for information.  
I can access CC6 and check by Web browser (Picture of Digi).

So, Is Network bridge need to Wireless access ?

I think to “wlan0 + iwconfig” can setup.

But, iwconfig does not set “Master mode”.

And I append “hostapd” package.

“hostapd” can setup wlan0 to “Master mode”.

PC can search CC6-AP, but it does not success the “ping”.

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [September 7, 2016, 4:59pm UTC](https://forums.digi.com/t/i-want-to-access-for-cc6-by-wifi-pc-or-android-tablet/17199/2 "2016-09-07T16:59:54Z")

</div>

yes, you need to follow this document to configure cc6 as Access point  
[http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#reference/yocto/r\_network\_bridging.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto|Syste](http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#reference/yocto/r_network_bridging.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CSyste)