# Installing AccelePort xem pci on SCO openserver 6.0

**URL:** <https://forums.digi.com/t/installing-acceleport-xem-pci-on-sco-openserver-6-0/7576>\
**Category:** USB Devices\
**Created:** [April 28, 2006, 10:40pm UTC](https://forums.digi.com/t/installing-acceleport-xem-pci-on-sco-openserver-6-0/7576 "2006-04-28T22:40:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GordonM](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@GordonM](https://forums.digi.com/u/GordonM)\
**Post date:** [April 28, 2006, 10:40pm UTC](https://forums.digi.com/t/installing-acceleport-xem-pci-on-sco-openserver-6-0/7576/1 "2006-04-28T22:40:59Z")

</div>

The driver listed on the web site is 40002486\_a.bin and is downloaded on my PC.  
How do I go from there?

The SCO 6 machine does not have internet access.  
My PC does

---

<div class="post-metadata">

**Author:** ![michaelt](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/michaelt/32/92_2.png) [@michaelt](https://forums.digi.com/u/michaelt)\
**Post date:** [April 28, 2006, 10:45pm UTC](https://forums.digi.com/t/installing-acceleport-xem-pci-on-sco-openserver-6-0/7576/2 "2006-04-28T22:45:17Z")

</div>

Once you get your driver over to your SCO server, this article will tell you how to install the driver:

[http://search2.digi.com/support/kbaseresultdetl.jsp?id=953](http://search2.digi.com/support/kbaseresultdetl.jsp?id=953)

Once the driver is installed, you’ll need to run mpi to configure your Xem PCI w/Port module(s) in the driver.