# Is there any documentation on how to control XBee sensors

**URL:** <https://forums.digi.com/t/is-there-any-documentation-on-how-to-control-xbee-sensors/18041>\
**Category:** XBee & XBee Gateway\
**Tags:** sensors, xbee, zigbee\
**Created:** [February 21, 2017, 9:59am UTC](https://forums.digi.com/t/is-there-any-documentation-on-how-to-control-xbee-sensors/18041 "2017-02-21T09:59:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sterwen](https://avatars.discourse-cdn.com/v4/letter/s/a587f6/32.png) [@Sterwen](https://forums.digi.com/u/Sterwen)\
**Post date:** [February 21, 2017, 9:59am UTC](https://forums.digi.com/t/is-there-any-documentation-on-how-to-control-xbee-sensors/18041/1 "2017-02-21T09:59:54Z")

</div>

hello,

I have 2 XBee (Zigbee) sensors that I want to connect to my my Zigbee coordinator.  
I have started with one and I am stuck on the way to get access to the input data (temperature/light).  
I can configure (PAN ID and coordinator address) the module through XCTU, but no way to have access to data. I believe that it was suppose to send data autonomously. The IR command is not available. I have tried the IS command, but got an error.

I haven’t found any available documentation on detailed operation.

The front LED is blinking fast, but I am not able to check if this is normal or a sign of failure.

Thanks

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [February 21, 2017, 1:06pm UTC](https://forums.digi.com/t/is-there-any-documentation-on-how-to-control-xbee-sensors/18041/2 "2017-02-21T13:06:59Z")

</div>

You need to use API mode and issue an IS command. You then need to calculate the data.
