# Kick device from Zigbee network

**URL:** <https://forums.digi.com/t/kick-device-from-zigbee-network/1027>\
**Category:** XBee - Zigbee\
**Created:** [March 19, 2013, 4:57am UTC](https://forums.digi.com/t/kick-device-from-zigbee-network/1027 "2013-03-19T04:57:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![atwoz](https://avatars.discourse-cdn.com/v4/letter/a/7c8e57/32.png) [@atwoz](https://forums.digi.com/u/atwoz)\
**Post date:** [March 19, 2013, 4:57am UTC](https://forums.digi.com/t/kick-device-from-zigbee-network/1027/1 "2013-03-19T04:57:30Z")

</div>

Hello,

Is there any way to kick a device that has already joined from the network. I’m using the Xbee SMT with the Zigbee Profile. I would like to be able to remove a device from the PAN. Is this possible? Could anybody tell me how?

Thank you.

---

<div class="post-metadata">

**Author:** ![fgilmar](https://avatars.discourse-cdn.com/v4/letter/f/e495f1/32.png) [@fgilmar](https://forums.digi.com/u/fgilmar)\
**Post date:** [March 19, 2013, 12:07pm UTC](https://forums.digi.com/t/kick-device-from-zigbee-network/1027/2 "2013-03-19T12:07:37Z")

</div>

atwoz,

In ZigBee networks you can send a Management Leave Request with frame type 0x11 Explicti Addressing Command.  
This Application Note explains how to send ZDOs commands and here you can find a useful frame builder.

You can always send a 0x11 frame, but if you want to be able to receive a response, you must set AO=3 in your device.

Regards,

---

<div class="post-metadata">

**Author:** ![16ksa23](https://avatars.discourse-cdn.com/v4/letter/1/aeb1de/32.png) [@16ksa23](https://forums.digi.com/u/16ksa23)\
**Post date:** [September 28, 2013, 11:24pm UTC](https://forums.digi.com/t/kick-device-from-zigbee-network/1027/3 "2013-09-28T23:24:45Z")

</div>

I think you can use ATNR0 command, which resets the netwrok parameters.