# LED indoor/outdoor signs possible with RabbitCore?

**URL:** <https://forums.digi.com/t/led-indoor-outdoor-signs-possible-with-rabbitcore/8946>\
**Category:** Rabbit\
**Created:** [January 10, 2009, 10:04pm UTC](https://forums.digi.com/t/led-indoor-outdoor-signs-possible-with-rabbitcore/8946 "2009-01-10T22:04:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tdg8934](https://avatars.discourse-cdn.com/v4/letter/t/a5b964/32.png) [@tdg8934](https://forums.digi.com/u/tdg8934)\
**Post date:** [January 10, 2009, 10:04pm UTC](https://forums.digi.com/t/led-indoor-outdoor-signs-possible-with-rabbitcore/8946/1 "2009-01-10T22:04:34Z")

</div>

I am a test engineer (electrical engineering) and was told on another forum that RabbitCore engines are often used for large size LED signs and displays. I am trying to develop one with single color and RGB modules from China but don’t know which system is best to begin with. I am well versed with Parallax SX chips but will also start learning AVRs and the Arduino. However, if the RabbitCore is the better processor to do this, I am all ears. I also don’t know C that well and would need a BASIC compiler of some sort. Does the Rabbit offer this?

Thanks for you support.