# Led pattern. Problem discovering Digi Connect ME.

**URL:** <https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011>\
**Category:** Plug N' Play\
**Tags:** led-blink-codes\
**Created:** [July 6, 2005, 7:49am UTC](https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011 "2005-07-06T07:49:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![VZ1](https://avatars.discourse-cdn.com/v4/letter/v/eb8c5e/32.png) [@VZ1](https://forums.digi.com/u/VZ1)\
**Post date:** [July 6, 2005, 7:49am UTC](https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011/1 "2005-07-06T07:49:25Z")

</div>

When I turn on my Connect ME on my own board the Ethernet Activity (Green) LED starts blinking continuously in a 1-1-5 pattern. The yellow light is on.

Digi Device Discovery displays “No devices found”.

What does this mean?

Thanks!

---

<div class="post-metadata">

**Author:** ![VZ1](https://avatars.discourse-cdn.com/v4/letter/v/eb8c5e/32.png) [@VZ1](https://forums.digi.com/u/VZ1)\
**Post date:** [July 26, 2005, 7:29am UTC](https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011/2 "2005-07-26T07:29:19Z")

</div>

Solved, it was pin 20 “resetSW” always grounded

---

<div class="post-metadata">

**Author:** ![KenMacfarlane](https://avatars.discourse-cdn.com/v4/letter/k/b9bd4f/32.png) [@KenMacfarlane](https://forums.digi.com/u/KenMacfarlane)\
**Post date:** [November 24, 2005, 9:32am UTC](https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011/3 "2005-11-24T09:32:46Z")

</div>

I’m having a similar problem. But I notice that pin20 is “Reserved” - pin 14 is Reset according to page 4 of the product brief aka the spec. So what does ResetSW mean?

---

<div class="post-metadata">

**Author:** ![Cameron](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@Cameron](https://forums.digi.com/u/Cameron)\
**Post date:** [November 24, 2005, 7:14pm UTC](https://forums.digi.com/t/led-pattern-problem-discovering-digi-connect-me/4011/4 "2005-11-24T19:14:52Z")

</div>

Ken,

When working with our Integration kit (or -S) modules this pin is utilized by the firmware to perform a factory reset on the device. Details on the usage of this pin are documented in the Digi Connect User’s Guide, [http://ftp1.digi.com/support/documentation/90000565\_E.pdf](http://ftp1.digi.com/support/documentation/90000565_E.pdf), as well as the Hardware reference, [http://ftp1.digi.com/support/documentation/90000631\_F.pdf](http://ftp1.digi.com/support/documentation/90000631_F.pdf).

When working with the Development kit (or -C) modules this pin is available to you as a general purpose I/O (GPIO). You are free to use this pin for whatever purpose you see fit.

I hope this helps.

Cameron