# Linking 2 xbee S6B wifi modules

**URL:** <https://forums.digi.com/t/linking-2-xbee-s6b-wifi-modules/30054>\
**Category:** XBee & XBee Gateway\
**Tags:** xctu, xbee\
**Created:** [March 7, 2024, 2:13am UTC](https://forums.digi.com/t/linking-2-xbee-s6b-wifi-modules/30054 "2024-03-07T02:13:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucas1](https://avatars.discourse-cdn.com/v4/letter/l/c67d28/32.png) [@Lucas1](https://forums.digi.com/u/Lucas1)\
**Post date:** [March 7, 2024, 2:13am UTC](https://forums.digi.com/t/linking-2-xbee-s6b-wifi-modules/30054/1 "2024-03-07T02:13:38Z")

</div>

Hello,

I’m new to using xbee modules. I have 2 S6b wifi modules and want them to communicate with each other.

I’ve used the active scan in the XCTU to connect both of them to the same wifi network. And I’ve made sure the destination IP address is the module IP address of the other. Both modules are showing a solid yellow light and a blinking blue light. May I know what this means? How do I know they’ve been linked to each other?

I am still not able to access my cubepilot flight controller throught the xbees.

Any help is greatly appreciated. Thank you.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [March 7, 2024, 12:19pm UTC](https://forums.digi.com/t/linking-2-xbee-s6b-wifi-modules/30054/2 "2024-03-07T12:19:57Z")

</div>

I would suggest looking in the product manual

> **[Digi XBee Wi-Fi](https://hub.digi.com/support/products/digi-xbee/digi-xbee-wi-fi/)**
>
> OEM Module with Fully Integrated Support for Digi Remote Manager

The association indicator should flash about twice a second if I recall. I would suggest looking at the AI command. [XBee Wi-Fi RF Module User Guide](https://www.digi.com/resources/documentation/Digidocs/90002180/#reference/r_cmd_ai.htm?Highlight=AI)
