# Losing data

**URL:** <https://forums.digi.com/t/losing-data/427>\
**Category:** XBee - Zigbee\
**Created:** [August 14, 2009, 3:13am UTC](https://forums.digi.com/t/losing-data/427 "2009-08-14T03:13:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![User934](https://avatars.discourse-cdn.com/v4/letter/u/71c47a/32.png) [@User934](https://forums.digi.com/u/User934)\
**Post date:** [August 14, 2009, 3:13am UTC](https://forums.digi.com/t/losing-data/427/1 "2009-08-14T03:13:32Z")

</div>

hi there.  
Changing a little bit of the main topic, I have a serious doubt.  
I intend to create a mesh net using Xbee ZB. For this, I will have one coordinator and four routers. I decide to choose the Transparent mode so as to use my own protocol.  
The problem is: in my first test, using one coordinator and one router, I configured both of them to broadcast one single byte per second. Debugging the system I realized that some bytes are lost often.  
I just want to knowm the reason why it is happening, cause I intend to use my own protocol, and for this reason my communication needs to be much faster than 1 byte per second.(around 1ms per byte)

I appreciate any help.

---

<div class="post-metadata">

**Author:** ![Admin1](https://avatars.discourse-cdn.com/v4/letter/a/bbce88/32.png) [@Admin1](https://forums.digi.com/u/Admin1)\
**Post date:** [August 20, 2009, 9:42pm UTC](https://forums.digi.com/t/losing-data/427/2 "2009-08-20T21:42:23Z")

</div>

I branched this to a new topic, since it doesn’t have to do with the original thread of setting the BD parameter.

---

<div class="post-metadata">

**Author:** ![johnf](https://avatars.discourse-cdn.com/v4/letter/j/848f3c/32.png) [@johnf](https://forums.digi.com/u/johnf)\
**Post date:** [August 21, 2009, 3:41pm UTC](https://forums.digi.com/t/losing-data/427/3 "2009-08-21T15:41:50Z")

</div>

Perhaps you could post the settings on your modules. If you save them from X-CTU as a .pro file, you can then attach the files to your post. It might help if people can see how your modules are set up.
