# Maximum crystal frequency

**URL:** <https://forums.digi.com/t/maximum-crystal-frequency/9428>\
**Category:** Rabbit\
**Created:** [December 29, 2010, 7:10pm UTC](https://forums.digi.com/t/maximum-crystal-frequency/9428 "2010-12-29T19:10:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![svirgillo](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@svirgillo](https://forums.digi.com/u/svirgillo)\
**Post date:** [December 29, 2010, 7:10pm UTC](https://forums.digi.com/t/maximum-crystal-frequency/9428/1 "2010-12-29T19:10:52Z")

</div>

I am using the RCM4120 module with a 27 MHz crystal to achieve a custom serial baud rate instead of the standard 29.4912 MHz Xtal.

I would like to speed up the processor but the next higher crystal that would give me the correct baud rate is 32 MHz.

My question is: will the RCM4120 board run with a 32 MHz crystal?

Thank you,  
SV

---

<div class="post-metadata">

**Author:** ![svirgillo](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@svirgillo](https://forums.digi.com/u/svirgillo)\
**Post date:** [January 5, 2011, 6:45pm UTC](https://forums.digi.com/t/maximum-crystal-frequency/9428/2 "2011-01-05T18:45:30Z")

</div>

To answer my own question… Yes it can.  
Mouser p/n 815-ABLS-32-B2

---

<div class="post-metadata">

**Author:** ![svirgillo](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@svirgillo](https://forums.digi.com/u/svirgillo)\
**Post date:** [January 5, 2011, 6:55pm UTC](https://forums.digi.com/t/maximum-crystal-frequency/9428/3 "2011-01-05T18:55:46Z")

</div>

Correction:  
815-ABLS-32.0MF-T
