# Measure Bit Error Rate and Packet Error rate

**URL:** <https://forums.digi.com/t/measure-bit-error-rate-and-packet-error-rate/14067>\
**Category:** XBee - Zigbee\
**Tags:** xbee-pro, xbee\
**Created:** [December 12, 2014, 8:06am UTC](https://forums.digi.com/t/measure-bit-error-rate-and-packet-error-rate/14067 "2014-12-12T08:06:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dhruval](https://avatars.discourse-cdn.com/v4/letter/d/9f8e36/32.png) [@Dhruval](https://forums.digi.com/u/Dhruval)\
**Post date:** [December 12, 2014, 8:06am UTC](https://forums.digi.com/t/measure-bit-error-rate-and-packet-error-rate/14067/1 "2014-12-12T08:06:30Z")

</div>

I am using Xbee 865/868 LP module.I want to measure Bit Error Rate and Packet Error Rate for my device. Can i measure This Bit Error Rate and Packet Error Rate in XCTU? I can not find any method to measure BER and PER.

Please Give me reply for my problem

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [December 12, 2014, 8:57am UTC](https://forums.digi.com/t/measure-bit-error-rate-and-packet-error-rate/14067/2 "2014-12-12T08:57:39Z")

</div>

I am not sure there is a way to read either of them in XCTU. XCTU would only be able to report it if there was an AT command already written in the firmware.

---

<div class="post-metadata">

**Author:** ![Dhruval](https://avatars.discourse-cdn.com/v4/letter/d/9f8e36/32.png) [@Dhruval](https://forums.digi.com/u/Dhruval)\
**Post date:** [December 21, 2014, 2:44pm UTC](https://forums.digi.com/t/measure-bit-error-rate-and-packet-error-rate/14067/3 "2014-12-21T14:44:25Z")

</div>

Thank you for replay,  
Can u give me another way of measure BER and PER for Xee 865/868 LP module ?