# Memory issues with the Digi Connect ME web interface

**URL:** <https://forums.digi.com/t/memory-issues-with-the-digi-connect-me-web-interface/4327>\
**Category:** Plug N' Play\
**Tags:** webserver\
**Created:** [July 5, 2011, 4:27pm UTC](https://forums.digi.com/t/memory-issues-with-the-digi-connect-me-web-interface/4327 "2011-07-05T16:27:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![VictorM](https://avatars.discourse-cdn.com/v4/letter/v/7ea924/32.png) [@VictorM](https://forums.digi.com/u/VictorM)\
**Post date:** [July 5, 2011, 4:27pm UTC](https://forums.digi.com/t/memory-issues-with-the-digi-connect-me-web-interface/4327/1 "2011-07-05T16:27:35Z")

</div>

Hi there,

I’m very new to connect ME, and I have a very basic problem.  
I’m trying to upload a Java Applet to a Digi Connect ME module throught the default html interface. The problem is that the JAR file is pretty large (1.3MB) , and the upload stops after a while with the following error message : Unable to upload file: out of disk space (Code: -5)

However, the only other file that I have uploaded is a small html document (211 bytes) and the System Information page reads that there are 2769 KB of free memory.

I have tried after rebooting the module, after upgrading the firmware, and on an other module but I keep getting the same error.

Does anyone know where this might come from ? Is there an obvious explanation I’m missing out ?

Thank you for your help,  
Victor

---

<div class="post-metadata">

**Author:** ![jgroch](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@jgroch](https://forums.digi.com/u/jgroch)\
**Post date:** [July 5, 2011, 10:46pm UTC](https://forums.digi.com/t/memory-issues-with-the-digi-connect-me-web-interface/4327/2 "2011-07-05T22:46:56Z")

</div>

Flash File system is about 256kB approx.

try this code:

unsigned int total\_blocks, free\_blocks, block\_size, total\_inodes, free\_inodes;

```
NAFSvolume_stats("FLASH0", &amp;total_blocks, &amp;free_blocks, &amp;block_size, &amp;total_inodes, &amp;free_inodes);
printf("tot=%d Free=%d size=%d

```

",total\_blocks, free\_blocks, block\_size);

Julius
