# Migration from 802.15.4 to digimesh

**URL:** <https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858>\
**Category:** Embedded Devices\
**Tags:** network, digimesh\
**Created:** [November 1, 2017, 2:26pm UTC](https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858 "2017-11-01T14:26:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![the0nkar](https://avatars.discourse-cdn.com/v4/letter/t/9e8a1a/32.png) [@the0nkar](https://forums.digi.com/u/the0nkar)\
**Post date:** [November 1, 2017, 2:26pm UTC](https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858/1 "2017-11-01T14:26:03Z")

</div>

I am current using Xbee S1 and willing to upgrade the firmware to digimesh to allow mesh networking. I was using ND in API frame to search nearby devices in 802.15.4 which returned the device detected and one additional frame in the end(which I checked to confirm that the network search has ended). Since I have migrated to Digimesh I am facing some problems to implement the same. In digimesh if I don’t pass a parameter after ND in the API frame I do not receive any additional frame like 802.15.4 firmware. After I tried adding some time limit parameter and updating, keeping value 0x20 for both, I observed that I am receiving only one device at a time. So if I have 5 devices it happens than many a times my ND response detects the same device multiple times. Same with DN and FN API frames. I know that increasing the time limit would be a better option but the value will differ for different number of devices to be detected. Is there any better solution than increasing the time limit?

Thank you for patient reading 🙂

Regards  
-Onkar

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 1, 2017, 2:34pm UTC](https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858/2 "2017-11-01T14:34:42Z")

</div>

What firmware version are you working with?

What is the API frame you are sending?

Are you using sleep modes at all? If so, what are the values?

---

<div class="post-metadata">

**Author:** ![the0nkar](https://avatars.discourse-cdn.com/v4/letter/t/9e8a1a/32.png) [@the0nkar](https://forums.digi.com/u/the0nkar)\
**Post date:** [November 2, 2017, 10:11am UTC](https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858/3 "2017-11-02T10:11:42Z")

</div>

I am using digimesh firmware on Xbee S1 and I am not using sleep modes at all. I am sending AT command ND API frame from XCTU

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 2, 2017, 10:13am UTC](https://forums.digi.com/t/migration-from-802-15-4-to-digimesh/18858/4 "2017-11-02T10:13:09Z")

</div>

Can you please provide the API frame you are sending to the module?
