# need to configure end device?

**URL:** <https://forums.digi.com/t/need-to-configure-end-device/16610>\
**Category:** XBee - DigiMesh\
**Tags:** configuration, device, end\
**Created:** [April 18, 2016, 8:04am UTC](https://forums.digi.com/t/need-to-configure-end-device/16610 "2016-04-18T08:04:53Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fuyacho](https://avatars.discourse-cdn.com/v4/letter/f/b9e5f3/32.png) [@fuyacho](https://forums.digi.com/u/fuyacho)\
**Post date:** [April 18, 2016, 8:04am UTC](https://forums.digi.com/t/need-to-configure-end-device/16610/1 "2016-04-18T08:04:53Z")

</div>

Hi  
I want to check the communication among coordinator - router - end device. I searched and found the way to set up coordinator on XCTU next gen but couldn’t find any info how to configure router and end device. My device is XBEE S2C. Would anyone help?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 18, 2016, 8:43am UTC](https://forums.digi.com/t/need-to-configure-end-device/16610/2 "2016-04-18T08:43:22Z")

</div>

The module comes pre configured as a Router so no change is needed with that aspect. To enable end device, simply set the SM command to a value other than 0. You see End devices are sleeping by nature. So setting it as a sleeping device turns it into an End device.

---

<div class="post-metadata">

**Author:** ![fuyacho](https://avatars.discourse-cdn.com/v4/letter/f/b9e5f3/32.png) [@fuyacho](https://forums.digi.com/u/fuyacho)\
**Post date:** [April 19, 2016, 12:24am UTC](https://forums.digi.com/t/need-to-configure-end-device/16610/3 "2016-04-19T00:24:06Z")

</div>

Hi mvut,  
thanks a lot for the answer.  
What a indirect setting…but it is understandable.
